EZ Blade Center Chassis Management Module provides total remote control of individual server blades, power supplies, cooling fans, and networking switches remotely. System administrators enjoy the management ease and reassurance of continuous onboard instrumentation monitoring (temperature sensors, power status, voltages and fan speed). Remote power control capabilities to reboot and/or reset the server are available as well as remote access to the BIOS configuration and operating system console information vial SOL (Serial over LAN) or embedded KVM capabilities. Because the controller is a separate processor, all monitoring and control functions operate flawlessly regardless of CPU operation or system power-on status.

• Remotely manage and monitor server blades, power supplies, cooling fans, and networking switches
• IPMI 2.0 compliant, with KVM over LAN / KVM over IP
• Serial over LAN (SOL)
• Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection)
• LAN Alert-SNMP Trap
• Event Log OS Independent
• Hardware Health Monitor Remote Power Control
• Management Tools - IPMIView, CLI (Command Line Interface)
• Supports RMCP & RMCP + Protocols

• VGA Port,
• 2x USB Ports Remote Management Processor and sub-system
• 1x LAN port Video ADC,
• Video Compress FPGA I2C,
• IPMI Management 12V Hot-swap Controller
• GBX Backplane Connector

Blades: Ebiz Pc Model: EZ-TB-I TwinBlades (delivers two nodes of processing power within each TwinBlade.)

Each node supports the following:

• Single or Dual Intel® Xeon® 5600/5500 series processors, with QPI up to 6.4 GT/s
• Intel® 5500 ;Chipset
• Up to 128GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 32GB
  Unbuffered DIMM
• Intel® 82576 Dual-Port Gigabit Ethernet
• 2 x 2.5" Hot-swap SATA Drive Trays
• Integrated Matrox G200eW Graphics
• Integrated IPMI2.0 w/ remote KVM and virtual media
• House up to 10 TwinBlade servers in 1 7U of rack space
• Mellanox ConnectX QDR InfiniBand 40Gbps or 10GbE support (Optional)

TwinBlade Center Chassis Management Module provides total remote control of individual server blades, power supplies, cooling fans, and networking switches remotely. System administrators enjoy the management ease and reassurance of continuous onboard instrumentation monitoring (temperature sensors, power status, voltages and fan speed). Remote power control capabilities to reboot and/or reset the server are available as well as remote access to the BIOS configuration and operating system console information vial SOL (Serial over LAN) or embedded KVM capabilities. Because the controller is a separate processor, all monitoring and control functions operate flawlessly regardless of CPU operation or system power-on status.

Key Features:

• Remotely manage and monitor server blades, power supplies, cooling fans, and networking switches
• IPMI 2.0 compliant, with KVM over LAN / KVM over IP
• Serial over LAN (SOL)
• Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection)
• LAN Alert-SNMP Trap
• Event Log
• OS Independent
• Hardware Health Monitor
• Remote Power Control
• Management Tools - IPMIView, CLI (Command Line Interface)
• Supports RMCP & RMCP + Protocols

Specifications:

• VGA Port, 2x USB Ports
• Remote Management Processor and sub-system
• 1x LAN port
• Video ADC, Video Compress FPGA
• I2C, IPMI Management
• 12V Hot-swap Controller
• GBX Backplane Connector

TwinBlade Networking

Gigabit Ethernet Modules

Switches
The Gigabit Ethernet switch module includes ten external 1-Gb/s uplink (RJ45) ports and fourteen internal 1-Gb/s downlink ports for connection to the SuperBlade™'s LAN interfaces. This layer 2 Ethernet switching module also has two internal Ethernet paths to the CMM(s) to allow configuration, management, and control of the switch and its ports through a browser-based management interface. Offering such advanced features as "trunking" (Link Aggregation – IEEE 802.11ad) , VLAN support, and Jumbo Frame support, the switch provides a connection between the Ethernet controller integrated on the mainboard and external Ethernet systems.

Chipset

• Broadcom BCM5345M

Internal Ports

• Ten 1-Gbps downlink ports for LAN interfaces of the server blades (capable of 14 internal ports)

External Uplink Ports

• Ten 1-Gbps uplink RJ-45 ports

Type

• Layer-2 switch

Bandwidth

• 24 Gbps

Trunking

• Link aggregation support

Jumbo Frame Support

• Up to 9k bytes

Remote Management

• Browser-based management

Protocols

• Spanning Tree, Rapid Spanning Tree, and Multiple Spanning Tree protocols (802.1D/1w)

OS

• Firmware upgradeable

Pass-Through
The Gigabit Ethernet Pass-through Module is a non-configurable pass through module that includes fourteen 1-Gb/s external uplink (RJ45) ports and fourteen internal 1-Gb/s downlink ports for the IX Triton Blade Center's LAN interfaces. This module also has two internal Ethernet paths to the CMM(s) for viewing module temperature and voltage (but not for configuration since all connections are fixed).

Chipset

• Broadcom 5464

Internal Ports

• 14 1-Gbps downlink ports for LAN interfaces of server blades

External Uplink Ports

• Fourteen RJ-45 uplink ports fixed at 1-Gbps (no auto-negotiation)

Remote Management

• Browser-based management

Protocols

• N/A

InfiniBand Modules

InfiniBand Switch Module
The InfiniBand Switch Modulen is a switch-based, point-to-point bi-directional serial link system. It provides high-speed interconnectivity among the blade modules and to external InfiiniBand peripherals. The InfiniBand switch supports 4X DDR connections – 20 gigabits per second – the fastest currently offered in the industry.

Chipset

• Mellanox InfiniScale III

Internal Ports

• Ten 4x DDR internal copper ports (capable of 14)

External Uplink Ports

• Ten 4x DDR external copper ports

Bandwidth

• 4x DDR (20Gbps) non-blocking architecture 960Gbps total switch bandwidth (24-port)

Latency

• 160ns port-to-port switch latency

Management

• In-band InfiniBand IBML, Command-Line Interface (CLI)

Power Consumption

• 34W

InfiniBand Mezanine HCA Cards
For any blade to access the InfiniBand module, it must have an InfiniBand mezzanine HCA card installed on its mainboard. The IXIBMS and IXIBMD mezzanine cards provide this 20Gbps connectivity (up to 4x DDR) through the backplane to the InfiniBand switch module.

Available Mezzanine Cards:

IXIBMD (Dual 4X 20Gbps)

Chipset

• Mellanox InfiniHost III Ex DDR

InfiniBand Ports

• Dual 4x DDR 20Gbps ports

Power Consumption

• 10.4W typical/ 11W max

(Single 4X 20Gbps)

Chipset

• Mellanox InfiniHost III Lx DDR

InfiniBand Ports

• Single 4x DDR 20Gbps port

Power Consumption

• 10.4W typical/ 11W max